Global

Methods

afterAll(functionopt, timeoutopt)

Run some shared teardown once after all of the specs in the describe are run.

Note: Be careful, sharing the teardown from a afterAll makes it easy to accidentally leak state between your specs so that they erroneously pass or fail.

Parameters:

Name	Type	Attributes	Default	Description
`function`	implementationCallback	<optional>		Function that contains the code to teardown your specs.
`timeout`	Int	<optional>	`jasmine.DEFAULT_TIMEOUT_INTERVAL`	Custom timeout for an async afterAll.

afterEach(functionopt, timeoutopt)

Run some shared teardown after each of the specs in the describe in which it is called.

Parameters:

Name	Type	Attributes	Default	Description
`function`	implementationCallback	<optional>		Function that contains the code to teardown your specs.
`timeout`	Int	<optional>	`jasmine.DEFAULT_TIMEOUT_INTERVAL`	Custom timeout for an async afterEach.

beforeAll(functionopt, timeoutopt)

Run some shared setup once before all of the specs in the describe are run.

Note: Be careful, sharing the setup from a beforeAll makes it easy to accidentally leak state between your specs so that they erroneously pass or fail.

Parameters:

Name	Type	Attributes	Default	Description
`function`	implementationCallback	<optional>		Function that contains the code to setup your specs.
`timeout`	Int	<optional>	`jasmine.DEFAULT_TIMEOUT_INTERVAL`	Custom timeout for an async beforeAll.

beforeEach(functionopt, timeoutopt)

Run some shared setup before each of the specs in the describe in which it is called.

Parameters:

Name	Type	Attributes	Default	Description
`function`	implementationCallback	<optional>		Function that contains the code to setup your specs.
`timeout`	Int	<optional>	`jasmine.DEFAULT_TIMEOUT_INTERVAL`	Custom timeout for an async beforeEach.

describe(description, specDefinitions)

Create a group of specs (often called a suite).

Calls to describe can be nested within other calls to compose your suite as a tree.

Parameters:

Name	Type	Description
`description`	String	Textual description of the group
`specDefinitions`	function	Function for Jasmine to invoke that will define inner suites and specs

expect(actual) → {matchers}

Create an expectation for a spec.

Parameters:

Name	Type	Description
`actual`	Object	Actual computed value to test expectations against.

Returns:

Type: matchers

fail(erroropt)

Explicitly mark a spec as failed.

Parameters:

Name	Type	Attributes	Description
`error`	String \| Error	<optional>	Reason for the failure.

fdescribe(description, specDefinitions)

A focused describe

If suites or specs are focused, only those that are focused will be executed

Parameters:

Name	Type	Description
`description`	String	Textual description of the group
`specDefinitions`	function	Function for Jasmine to invoke that will define inner suites and specs

See:

fit(description, testFunction, timeoutopt)

A focused it

If suites or specs are focused, only those that are focused will be executed.

Parameters:

Name	Type	Attributes	Default	Description
`description`	String			Textual description of what this spec is checking.
`testFunction`	implementationCallback			Function that contains the code of your test.
`timeout`	Int	<optional>	`jasmine.DEFAULT_TIMEOUT_INTERVAL`	Custom timeout for an async spec.

it(description, testFunctionopt, timeoutopt)

Define a single spec. A spec should contain one or more expectations that test the state of the code.

A spec whose expectations all succeed will be passing and a spec with any failures will fail.

Parameters:

Name	Type	Attributes	Default	Description
`description`	String			Textual description of what this spec is checking
`testFunction`	implementationCallback	<optional>		Function that contains the code of your test. If not provided the test will be `pending`.
`timeout`	Int	<optional>	`jasmine.DEFAULT_TIMEOUT_INTERVAL`	Custom timeout for an async spec.

pending(messageopt)

Mark a spec as pending, expectation results will be ignored.

Parameters:

Name	Type	Attributes	Description
`message`	String	<optional>	Reason the spec is pending.

spyOn(obj, methodName) → {Spy}

Install a spy onto an existing object.

Parameters:

Name	Type	Description
`obj`	Object	The object upon which to install the `Spy`.
`methodName`	String	The name of the method to replace with a `Spy`.

Returns:

Type: Spy

spyOnProperty(obj, propertyName, accessTypeopt) → {Spy}

Install a spy on a property installed with Object.defineProperty onto an existing object.

Parameters:

Name	Type	Attributes	Default	Description
`obj`	Object			The object upon which to install the `Spy`
`propertyName`	String			The name of the property to replace with a `Spy`.
`accessType`	String	<optional>	get	The access type (get\|set) of the property to `Spy` on.

Returns:

Type: Spy

xdescribe(description, specDefinitions)

A temporarily disabled describe

Specs within an xdescribe will be marked pending and not executed

Parameters:

Name	Type	Description
`description`	String	Textual description of the group
`specDefinitions`	function	Function for Jasmine to invoke that will define inner suites and specs

xit(description, testFunctionopt)

A temporarily disabled it

The spec will report as pending and will not be executed.

Parameters:

Name	Type	Attributes	Description
`description`	String		Textual description of what this spec is checking.
`testFunction`	implementationCallback	<optional>	Function that contains the code of your test. Will not be executed.

Type Definitions

Expectation

Properties:

Name	Type	Description
`matcherName`	String	The name of the matcher that was executed for this expectation.
`message`	String	The failure message for the expectation.
`stack`	String	The stack trace for the failure if available.
`passed`	Boolean	Whether the expectation passed or failed.
`expected`	Object	If the expectation failed, what was the expected value.
`actual`	Object	If the expectation failed, what actual value was produced.

implementationCallback(doneopt)

Callback passed to parts of the Jasmine base interface.

By default Jasmine assumes this function completes synchronously. If you have code that you need to test asynchronously, you can declare that you receive a done callback, return a Promise, or use the async keyword if it is supported in your environment.

Parameters:

Name	Type	Attributes	Description
`done`	function	<optional>	Used to specify to Jasmine that this callback is asynchronous and Jasmine should wait until it has been called before moving on.

Returns:

Optionally return a Promise instead of using done to cause Jasmine to wait for completion.

JasmineDoneInfo

Information passed to the Reporter#jasmineDone event.

Properties:

Name	Type	Description
`overallStatus`	OverallStatus	The overall result of the sute: 'passed', 'failed', or 'incomplete'.
`incompleteReason`	IncompleteReason	Explanation of why the suite was incimplete.
`order`	Order	Information about the ordering (random or not) of this execution of the suite.
`failedExpectations`	Array.<Expectation>	List of expectations that failed in an `afterAll` at the global level.
`deprecationWarnings`	Array.<Expectation>	List of deprecation warnings that occurred at the global level.

JasmineStartedInfo

Information passed to the Reporter#jasmineStarted event.

Properties:

Name	Type	Description
`totalSpecsDefined`	Int	The total number of specs defined in this suite.
`order`	Order	Information about the ordering (random or not) of this execution of the suite.

SpecResult

Properties:

Name	Type	Description
`id`	Int	The unique id of this spec.
`description`	String	The description passed to the `it` that created this spec.
`fullName`	String	The full description including all ancestors of this spec.
`failedExpectations`	Array.<Expectation>	The list of expectations that failed during execution of this spec.
`passedExpectations`	Array.<Expectation>	The list of expectations that passed during execution of this spec.
`deprecationWarnings`	Array.<Expectation>	The list of deprecation warnings that occurred during execution this spec.
`pendingReason`	String	If the spec is `pending`, this will be the reason.
`status`	String	Once the spec has completed, this string represents the pass/fail status of this spec.

SuiteResult

Properties:

Name	Type	Description
`id`	Int	The unique id of this suite.
`description`	String	The description text passed to the `describe` that made this suite.
`fullName`	String	The full description including all ancestors of this suite.
`failedExpectations`	Array.<Expectation>	The list of expectations that failed in an `afterAll` for this suite.
`deprecationWarnings`	Array.<Expectation>	The list of deprecation warnings that occurred on this suite.
`status`	String	Once the suite has completed, this string represents the pass/fail status of this suite.